Publication

Publication list of SCI papers by Jer-Ren Yang

 

1.         S. P.Tsai, T. C. Su, J. R. Yang, C. Y. Chen, Y. T. Wang, C. Y. Huang, “Effect of Cr and Al additions on the development of interphase-precipitated carbides strengthened dual-phase Ti-bearing steels”, Materials and Design 119 (2017) 319-325.

2.         Y. J. Lin, S. F. Wang,, B. C. Lai, Y. X. Liu, Y. L. Chang, J. R. Yang, “Densification, microstructure evolution, and microwave dielectric properties of Mg1-xCaxZrTa2O8 ceramics”,  Journal of the European Ceramic Society, 37 (2017) 2825-2831.

3.         Y. T. Chi, Y. T. Tsai, B. M. Huang and J. R. Yang, “Investigation of idiomorphic ferrite and allotriomorphic ferrite using electron backscatter diffraction technique”, Materials Science and Technology, 33(2017) 537-545.

4.         S. P. Tsai, S, C. H. Jen, H. W. Yen, C. Y. Chen, M. C. Tsai, J. R. Yang, “Effects of interphase TiC precipitates on tensile properties and dislocation structures in a dual phase steel” Materials Characterization 123 (2017) 153–158.

5.         Y. Li, Z. Shi, J. Lin, Y.L. Yang, Q. Rong, B. M. Huang, T. F. Chung, C. S. Tsao, J. R. Yang, D. S. Balint, “A unified constitutive model for asymmetric tension and compression creep-ageing behaviour of naturally aged Al-Cu-Li alloy”, International Journal of Plasticity 89 (2017) 130-149.

6.         Y. C. Hsieh, L. Zhang, T. F. Chung, Y. T. Tsai, J. R. Yang, T. Ohmura and T. Suzuki, “In-situ transmission electron microscopy investigation of the deformation behavior of spinodal nanostructured δ-ferrite in a duplex stainless steel”, Scripta Materialia 125(2016)44-48.

7.         C. Celada-Casero, B.M. Huang, M.M. Aranda, J. R. Yang, D. SanMartin, “Mechanisms of ultrafine-grained austenite formation under different isochronal conditions in a cold-rolled metastable stainless steel”, Materials Characterization 118 (2016) 129-141.

8.         Y. L. Chang, P. Y. Chen, Y. T. Tsai, and J. R. Yang, “Crystallographic analysis of lenticular martensite in Fe–1.0C–17Cr stainless steel by electron backscatter diffraction”, Materials Characterization 113 (2016) 17-25.

9.         Y. T. Tsai, C. R. Lin, W. S. Lee, C. Y. Huang, and J. R. Yang, “Mechanical behavior and microstructural evolution of nanostructured bainite under high-strain rate deformation by Hopkinson bar”, Scripta Materialia, 115(2016)46-51.

10.      Y. Li, Z. Shi, L. Lin, Y. L. Yang, B. M. Huang, T. F. Chung and J. R. Yang, “Experimental investigation of tension and compression creep-ageing behaviour of AA2050 with different initial tempers” Materials Science and Engineering A, 657 (2016) 299-308.

11.      T. Lin, Z.R.Qiu, J.R.Yang, L.W. Ding, Y. Gao e, Z.C. Feng, “Investigation of photoluminescence dynamics in InGaN/GaN multiple quantum wells”, Materials Letters 173(2016)170-173.

12.      C.Y. Chen, J.R. Yang, C.C.Chen, S.F. Chen, “Microstructural characterization and strengthening behavior of nanometer sized carbides in Ti–Mo microalloyed steels during continuous cooling process”, Materials Characterization 114 (2016) 18-29.

13.      M. Martin-Aranda, R. Rementeria, R. Hackenberg, E. Urones-Garrote, S. P. Tsai, J. R. Yang and C. Capdevila, “The non-steady state growth of pearlite outside the Hultgren extrapolation”, Materials, 9:998 (2016) 1-10.

14.      P. Kumar, S. Maikap, K. Singh, S. Chatterjee,Y. Y. Chen, H. M. Cheng, R. Mahapatra, J. T. Qiu, and J. R. Yang, “Highly Reliable Label-Free Detection of Urea/Glucose and Sensing Mechanism Using SiO2 and CdSe-ZnS Nanoparticles in Electrolyte-Insulator-Semiconductor Structure”, Journal of the electrochemical Society, 163 (2016) B 580-587.

15.      P. Kumar, S. Maikap, J. T. Qiu, S. Jana, A. Roy, K. Singh, H.M. Cheng, M. T. Chang, R. Mahapatra, H.C. Chiu and J. R. Yang, “Detection of pH and Enzyme-Free H2O2 Sensing Mechanism by Using GdO x  Membrane in Electrolyte-Insulator-Semiconductor Structure”, Nanoscale Research Letters, 11:434(2016)1-8.

16.      X. L. Wang, Y. T. Tsai, J. R. Yang, C. J. Shang, X. M. Wang, L. M. Dong and W. W. Yang, “Investigation of the microstructure and toughness of 550 MPa grade pipeline after the hot-bending Process”, Materials Science and Technology, 32 (2016) 664-674.

17.      Y. T. Tsai, H. T. Chang, B. M. Huang, C. Y. Huang, J. R. Yang, “Microstructural characterization of Charpy-impact-tested nanostructured bainite”, Materials Characterization 107 (2015) 63-69.

18.      C. Y. Chen, C. C. Chen and J. R. Yang, “Synergistic effect of austenitizing temperature and hot plastic deformation strain on the precipitation behavior in novel HSLA steel”, Materials Science & Engineering A, 639 (2015) 145-154.

19.      C. Garcia-Mateo, J.A. Jimenez, H.-W. Yen, M.K. Miller, L. Morales-Rivas, M. Kuntz, S.P. Ringer, J.-R. Yang and F.G. Caballero, “Low temperature bainitic ferrite: Evidence of carbon super-saturation and tetragonality”, Acta Materialia, 91(2015) 162-173.

20.      C. Y. Chen, C. C. Chen and J. R. Yang, “Control of precipitation morphology in the novel HSLA steel”, Materials Science & Engineering A, 634 (2015) 123-133.

21.      M. Kawasakia, C.N. Hsiao, J.R. Yang, M. Shiojiri, “Structural investigation of Ru/Pt nanocomposite films prepared by plasma-enhanced atomic layer depositions”, MICRON, 74(2015) 8-14.

22.      S. Roy, S. Maikap, G. Sreekanth, M. Dutta, D. Jana, Y.Y. Chen and J. R. Yang, “Improved resistive switching phenomena and mechanism using Cu-Al alloy in a new Cu:AlOx/TaOx/TiN structure” Journal of Alloys and Compounds 637 (2015) 517-523.

23.      C. Y. Chen, C. C. Chen and J. R. Yang, “Dualism of precipitation morphology in high strength low alloy steels”, Materials Science & Engineering A, 626 (2015)74–79.

24.      L. Li, B.H. Song, Y.L. Chang, H. Xia, J.R. Yang, K.S. Lee, L. Lu, “Retarded phase transition by fluorine doping in Li-rich layered Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode material” JOURNAL OF POWER SOURCES, 283 (2015) 162-170. 

25.      H.Y. Shih, M Shiojiri, C.H. Chen, S.F. Yu, C.T. Ko, J.R.Yang, R.M. Lin and M.J. Chen, “Ultralow threading dislocation density in GaN epilayer on near-strain-free GaN compliant buffer layer and its applications in hetero-epitaxial LEDs”, Scientific Reports, Volume: 5, Article Number: 13671, 2015.

26.      L. Morales-Rivas, H.W. Yen, B. M. Huang, M. Kuntz, F. G. Caballero, J.R.Yang,and C. Garcia-Mateo, “Tensile Response of Two Nanoscale Bainite Composite-Like Structures”, JOM 67(2015) 2223-2235. 

27.      B.M. Huang, J.R. Yang, H.W. Yen, C.H.Hsu, C. Y. Huang, H. Mohrbacher, “Secondary hardened bainite”, Materials Science and Technology, 30 ( 2014 ) 1014 – 1023.

28.      Z. J. Xie, S.F. Yuan, W.H. Zhou, J.R. Yang, H. Guo, C.J. Shang, “Stabilization of retained austenite by the two-step intercritical heat treatment and its effect on the toughness of a low alloyed steel”, Materials & Design, 59 (2014) 193–198.

29.      Z.J. Xie, Y.Q. Ren, W.H. Zhou, J.R. Yang, C.J. Shang and R.D.K. Misra, “Stability of retained austenite in multi-phase microstructure during austempering and its effect on the ductility of a low carbon steel”, Material Science and Engineering A, 603 (2014) 69 - 75.

30.      C.P. Chang, M.W. Chu, H.T. Jeng, S.L. Cheng, J.G. Lin, J.R. Yang and C.H. Chen, “Condensation of two-dimensional oxide-interfacial charges into one-dimensional electron chains by the misfit-dislocation strain field”, Nature Communications, Vol. 5 (2014), Article3522 (DOI: 10.1038).

31.      M. Y. Chen, M. Goune, M. Verdier, Y. Brechet and J. R. Yang, “Interphase precipitation in vanadium-alloyed steels: Strengthening contribution and morphological variability with austenite to ferrite transformation”, Acta Materialia, 64(2014) 78-92.

32.      M. Y. Chen, M. Gouné, M. Militzer, Y. Bréchet and J. R. Yang “Superledge Model for Interphase Precipitation During Austenite-to-Ferrite Transformation” Metallurgical and Materials Transactions A, 45 (2014) 5351-5361.

33.      F.G. Caballeroa, H.W. Yen, M.K. Miller, J. Cornide, H.T. Chang, C. Garcia-Mateo and J.R.Yang, “Three phase crystallography and solute distribution analysis during residual austenite decomposition in tempered nanocrystalline bainitic steels”, Materials Characterization, 88 (2014) 15-20.

34.      C. Y. Chen, C.C. Chen and J. R. Yang, “Microstructure Characterization of nanometer carbides heterogeneous precipitation in Ti-Nb and Ti-Nb-Mo steel”, Materials Characterization, 88 (2014) 69-79.

35.      P. K. Chiu, B. H. Liou, C. N. Hsiao and J. R. Yang, “Investigation on optical and electrical properties of ZnO sandwich structure with metal interlayer” Japanese Journal of Applied Physics, Vol. 53 (2014),  Article Number: 05FF05.

36.      D. Jana, S. Maikap, A. Prakash, Y.Y. Chen, H.C. Chiu and J. R. Yang, “Enhanced resistive switching phenomena using low-positive-voltage format and self-compliance IrOx/GdOx/W cross-point memories”, Nanoscale Research Letters (2014) Volume 9, Article12.

37.      P. K. Chiu, CT Lee, D.Y. Chiang, W.H. Cho, C.N. Hsiao, Y.Y. Chen, B.M. Huang, J.R. Yang, “Conductive and transparent multilayer films for low-temperature TiO2/Ag/SiO2 electrodes by E-beam evaporation with IAD”,  Nanoscale Research Letters, Volume: 9 (2014), Article Number: 35.

38.      J. Lu, Y. L. Chang, B. Song, J. R. Yang, K.S. Lee and L. Lu, “High energy spinel-structured cathode stabilized by layered materials for advanced lithium-ion batteries”, Journal of Power Sources 271(2014) 604-613.

39.      L. Li, Y. L. Chang, H. Xia, B. H. Song, J. R. Yang, K.S. Lee and L. Lu, “NH4F surface modification of Li-rich layered cathode materials”, Solid State Ionics,  264 (2014) 36-44.

40.      S. Ye, J. Fuh, L. Lu, Y. L. Chang and J. R. Yang, “Structure and properties of hot-pressed lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O-3 piezoelectric ceramics”, RSC ADVANCES, 3 (2013) 20693-20698. 

41.      M. Y. Chen, H. W. Yen and J. R. Yang, “The transition from interphase-precipitated carbides to fibrous carbides in a vanadium-containing medium-carbon steel”, Scripta Materialia 68 (2013) 829–832.

42.      Y. Y. Chen, J. R. Yang, S. L. Cheng and M. Shiojiri, “Structural investigation of ZnO: Al films deposited on the Si substrates by radio frequency magnetron sputtering, Thin Solid Films, 545(2013) 183-187.

43.      J. F. Chien, Y. H. Huang, Y. J. Chang, J. R. Yang, M. Shiojiri and M. J. Chen, “Tunable Optical and Structural Properties of Mg_xZn_1−xO Films Prepared by In Situ Atomic Layer Doping Technique”, ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, 2 (2013) 31-35.

44.      M. Kawasaki, M. J. Chen, J. R. Yang, W. A. Chiou, and M. Shiojiri, “Structural analysis of Au/TiO2 thin films deposited on the glass substrate” , APPLIED PHYSICS LETTERS  Volume: 102,   Issue: 9,    Article Number: 091603  (2013).

45.      C. P. Chang,  J. G. Lin , H. T. Jeng, S-L. Cheng, W. F. Pong, Y. C Shao, Y. Y. Chin, H. -J. Lin, C. W. Chen, J. -R. Yang, C. H. Chen,  and M. -W. Chu,  “Atomic-scale observation of a graded polar discontinuity and a localized two-dimensional electron density at an insulating oxide interface”, PHYSICAL REVIEW B, Volume: 87,   Issue: 7,     Article Number: 075129 (2013).

46.      Z.C. Feng, L.H. Zhu, T.W. Kuo, C.Y. Wu, H.L. Tsai, B.L. Liu, J.R. Yang, “Optical and structural studies of dual wavelength InGaN/GaN tunnel-injection light emitting diodes grown by metalorganic chemical vapor deposition”, Thin Solid Films, 529(2013) 269-274. 

47.      J. R. Yang, H. W. Yen, P. Y. Chen and C. Y. Huang, “ The development of interphase precipitated nanometer-sized carbides in the advanced low-alloy steels”, Materials Science Forum 762(2013) 95-103.

48.      B. M. Huang,  H. W. Yen,  D. Ho, H. Ho and J. R. Yang, “The influence of Widmanstätten ferrite on yielding behavior of Nb-containing reinforcing steel bars”,  Scripta Materialia, 67 (2012) 431–434

49.      H. W. Yen, M.  Huang, C. P. Scott and J. R. Yang, “Interactions between deformation-induced defects and carbides in a vanadium-containing TWIP steel”, Scripta Materialia, 66(2012) pp. 1018-1023.

50.      W. Banerjee, S Maikap, C.S. Lai, Y.Y. Chen, M.J. Tsai and J.R.Yang, “Formation polarity dependent improved resistive switching memory characteristics using nanoscale (1.3 nm) core-shell IrOx nano-dots”, NANOSCALE  RESEARCH  LETTERS  Volume: 7,  Article Number: 194  (2012).

51.      W. Banerjee, S. Maikap, S. Z. Rahaman, A . Prakash, T.C. Tien, W.C. Li and J.R. Yang, “Improved Resistive Switching Memory Characteristics Using Core-Shell IrOx Nano-Dots in Al2O3/WOx Bilayer Structure”, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 159 (2012)pp. H177-H182.

52.      M. J. Chen, J.R. Yang and M. Shiojiri, “ZnO-based ultra-violet light emitting diodes and nanostructures fabricated by atomic layer deposition”, Semiconductor Science and Technology, 27(2012) 074005.

53.      P.K. Chiu, W.H. Cho, H.P. Chen, C.N. Hsiao and J.R. Yang, “Study of a sandwich structure of transparent conducting oxide films prepared by electron beam evaporation at room temperature”,  NANOSCALE RESEARCH LETTERS, (2012)Volume: 7, Article Number: 304.

54.      P.W. Hsu, F. H. Kao, S.H. Wang and JR Yang, “Twinned formation in weld metal of titanium bearing nano precipitated high strength steel”, Materials Chemistry and Physics, 136(2012) 1103–1108.

55.      M. C. Lin, MK Wu, MJ Chen, JR Yang, M Shiojiri, “Blue-shifted stimulated emission from ZnO films deposited on SiO by atomic layer deposition”, Materials Chemistry and Physics, 135(2012)88-93.

56.      H. W. Yen, P. Y. Chen, C. Y. Huang and J. R. Yang, “Interphase precipitation of nanometer-sized carbides in a titanium-molybdenum-bearing low-carbon steel”, Acta Materialia, 59(2011) pp. 6264-6274.

57.      H. L. Yi, J. H. Ryu, H. K. D. H. Bhadeshia, H.W. Yen and J. R. Yang, “Low-alloy duplex, directly quenched transformation-induced plasticity steel”, Scripta Materialia, 65(2011) pp. 604-607.

58.      K. H. Tu, S. S. Li, W. C. Li, J. R. Yang and M. W. Chu, “Solution processable nanocarbon platform for polymer solar cells”, Energy & Environmental Science, 4(2011) pp. 3521-3526.

59.      F. G. Caballero, H. Y. Yen, M. K. Miller and J. R. Yang, “Complementary use of transmission electron microscopy and atom probe tomography for the examination of plastic accommodation in nanocrystalline bainitic steels”, Acta Materialia, 59(2011) pp. 6117-6123.

60.      W. C. Li, H. L Tsai, H. C. Chen, M. K. Wu, H. R. Chen, M. J. Chen, J. R. Yang and M. Shiojiri,“Structural investigation of n-ZnO/p-GaN ultraviolet light emitting diodes grown by atomic layer deposition,” Functional Materials Letters, Vol. 4 (2011) pp.221-224.

61.      S. S. Li, C. P. Chang, C. C. Lin, C. C. Chang, J. R. Yang, M. W. Chu and C. W. Chen, “Interplay of Three-Dimensional Morphologies and Photocarrier Dynamics of Polymer/TiO(2) Bulk Heterojunction Solar Cells”, Journal of the American Chemical Society, 133(2011) pp. 11614-11620.

62.      P. W. Hsu, R. S. Chen, F. H. Kao, S. H. Wang and J. R. Yang, “Martensite nucleation site and grain refinement in duplex titanium alloy weldment by active flux with nanoparticle addition”, Science and Technology of Welding and Joining, 16(2011) pp. 514-521.

63.      Y. H. Lin, K. H. Hu, F. H. Kao, S. H. Wang and J. R. Yang, “Dynamic strain aging in low cycle fatigue of duplex titanium alloys”, Materials Science and Engineering A, 528 (2011) pp. 4381-4389..

64.      Y. H. Lin, S. M. Wu, F. H. Kao, S. H. wang and J. R. Yang, “Microtwin formation in the a phase of duplex titanium alloys affected by strain rate”, Materials Science and Engineering A, 528 (2011) pp. 2271-2276.

65.      W. C. Li, W. Banerjee, M. Siddheswar and J. R. Yang, “Particle Size and Morphology of Iridium Oxide Nanocrystals in Non-Volatile Memory Device”, Materials Transctions, 52(2011) pp. 331-335.

66.      T. P. Wang, F. H. Kao, S.H. wang and J. R. Yang, “Isothermal treatment influence on nanometer-size carbide precipitation of titanium-bearing low carbon steel”, Materials Letters, 65(2011) pp. 396-399.

67.      Y.T. Shih, J. F. Chien, M. J. Chen. J. R. Yang and M. Shiojiri, “P-Type ZnO:P Films Fabricated by Atomic Layer Deposition and Thermal Processing”, Journal of the Electrochemical Society, 158(2011) pp. H516-520.

68.      W. Banerje, S.  Maikap, T. -C Tien, W. -C Li, J. R. Yang, “Impact of metal nano layer thickness on tunneling oxide and memory performance of core-shell iridium-oxide nanocrystals”,  Journal of Applied Physics,  110(2011), Number: 074309.

69.      H. C., Chen, , M. J. Chen, ,  Y. H. Huang, ,  W. C. Sun, ,  W. C. Li, , J. R. Yang, ,  H. Kuan and M. Shiojiri, “White-Light Electroluminescence From n-ZnO/p-GaN Heterojunction Light-Emitting Diodes at Reverse Breakdown Bias” IEEE TRANSACTIONS ON ELECTRON DEVICES, 58(2011)3970-3975.

70.      S. Maikap, W. Banerjee, T.C. Tien, T. Y. Wang, J. R. Yang, “Temperature-Dependent Physical and Memory Characteristics of Atomic-Layer-Deposited RuO(x) Metal Nanocrystal Capacitors”, Journal of Nanomaterials, 2011, Article Number: 810879.

71.      C. C. Wu, C. Y. Chen, S. H. Wang, J. R. Yang and J. Fang, “Weld metal phase transformation of as welded 6Mo superaustenitic stainless steel after cross-weld fatigue”,  Science and Technology of Welding and Joining, 15(2010) pp. 407-413.

72.      H. W. Yen, C. Y. Huang, J. R. Yang, “The nano-carbide control: design of super-ferrite in steels”, Advanced Materials Research, 89-91 (2010) 663-668.

73.      H.Y. Lee , H. W. Yen , H. T. Chang, J. R. Yang, “Substructures of martensite in Fe-1C-17Cr stainless steel”, Scripta   Materialia, 62 (2010) 670-673.

74.      H. W. Yen , C.Y. Chen , T. Y. Wang , C. Y. Huang , J. R. Yang, “Orientation relationship transition of nanometre sized interphase precipitated TiC carbides in Ti bearing steel”, Materials Science and Technology, 26 (2010) 421-430.

75.      H.C. Chen, M. J. Chen, T. C. Liu, J. R. Yang and M. Shiojiri, “Structure and stimulated emission of a high-quality zinc oxide epilayer grown by atomic layer deposition on the sapphire substrate”, Thin Solid Film, 519 (2010)536-540.

76.      T. P. Wang, F. H.Kao, S. H. Wang, J. R. Yang, C. Y. Huang and H. R. Chen, “Isothermal treatment influence on  nanometer-size carbide precipitation of titanium-bearing low carbon steel”, Materials Letters, 65 (2010) 396-399.

77.      Y. T. Shih, C. Y. Chiu, C. W. Chang, J. R. Yang, M. Shiojiri, M. J.Chen, “ Stimulated Emission in Highly (0001)-Oriented ZnO Films Grown by Atomic Layer Deposition on the Amorphous Glass Substrates”, Journal of the  Electrochemical Society, 157 (2010) H879-H883.

78.      M. J. Chen, Y. T. Shih , M. K. Wu, H. C. Chen, H. L. Tsai, W. C. Li, J. R. Yang, H. Kuan, M. Shiojiri, “Structure and Ultraviolet Electroluminescence of n-ZnO/SiO2-ZnO Nanocomposite/p-GaN Heterostructure Light-Emitting Diodes”, IEEE Transactions on Electron Devices, 57 (2010) 2195-2202.  

79.      E. Sun, F. H. Su, C.H. Chen, H. L. Tsai, J. R. Yang and M. J. Chen, “Temperature-dependent photoluminescence of arsenic-doped Si nanocrystals”, Journal of Luminescence, 130 (2010) 1485-1488.  

80.      M. Ceh , H. C. Chen , M. J. Chen , J. R. Yang, M. Shiojiri, “Structure and Electro-Optical Properties of Thin Films Grown by Alternate Atomic Layer Deposition of ZnO and Al2O3 on the Sapphire Substrate”, Materials Transactions, 51 (2010)  219-226.

81.      M. K. Wu , M. J. Chen , F. Y. Tsai , J. R. Yang, M. Shiojiri, “Fabrication of ZnO Nanopillars by Atomic Layer Deposition” , Materials Transactions, 51 (2010)  253-255.  

82.       A. Das, S. Maikap, C.-H. Lin, P.-J. Tzeng, T.-C. Tien, T.-Y. Wang, L.-B. Chang, J.-R. Yang and M. J. Tsai, “Ruthenium oxide metal nanocrystal capacitors with high-κ dielectric tunneling barriers for nanoscale nonvolatile memory device applications”, Microelectronic Engineering, 87 (2010) 1821-1827.   

83.      H. W. Yen , C. Y. Huang, J. R. Yang, “The nano-carbide control: design of superferrite in steels”, Advanced Materials Research, 89-91 (2010) 663-668.

84.      H. C. Chen , M. J. Chen , Y. C. Cheng , J.R. Yang, M. Shiojiri., “ Amplified Spontaneous Emission From ZnO in n-ZnO/p-GaN Heterojunction Light-Emitting Diodes With an External-Feedback Reflector”, IEEE Photonics Technology Letters, 22  (2010) 248-250.  

85.      H. C. Hsu, Y. C Lin, S. H. Wang, F. H. Kao, W. C. Lee, J. R. Yang, P. W. Hsu, H. W. Yen, W. S. Lee, “Inducement of bainite and carbide transformation from retained austenite based on a high strain rate”, Scripta Materialia, 62 (2010) 372-375.

86.      Y. T. Shih, M. K. Wu, M. J. Chen, Y. C. Cheng, J. R. Yang and M. Shiojiri, “ZnO-based heterojunction light-emitting diodes on p-SiC(4H) grown by atomic layer deposition”, Applied Physics B- Laser and Optics, 98(2010) 767-772.   

87.      J. R. Yang, W.C. Li, H. L. Tsai, J. T. Hsu and M. Shiojiri, “Electron microscopy investigations of V defects in multiple InGaN/GaN quantum wells and InGaN quantum dots”, Journal of Microscopy, 237 (2010) 275-281.

88.      H. C. Chen;  M. J. Chen;  M. K. Wu; Wei-Chih Li;  H. L. Tsai;  J. R. Yang;  H.Kuan;  M. Shiojiri, “UV Electroluminescence and Structure of n-ZnO/p-GaN Heterojunction LEDs Grown by Atomic Layer Deposition”, IEEE Journal of Quantum Electronics, 46 (2010) 265-271.

89.      H. W. Yen, C. Y. Huang and J. R. Yang, “Characterization of interphase-precipitated nanometer-sized carbides in a Ti–Mo-bearing steel”, Scripta Materialia, 61 (2009) 616-619.

90.      H.T. Kuo, R.C. Wei, W.F. Wu and J.R. Yang, “Simulated heat affected zone in ASTM A533-B steel plates under low heat inputs”, Materials Chemistry and Physics, 117 (2009) 471-477. 

91.      E. Sun , F. H. Su , Y. T. Shih , H. L. Tsai , C. H. Chen , M. K. Wu , J. R. Yang and M. J. Chen, “An efficient Si light-emitting diode based on an n-ZnO/SiO2-Si nanocrystals-SiO2/p-Si heterostructure”, Nanotechnology 20, 445202 (2009).

92.      S. J. Wang, E. H Park, Z. C. Feng^,  H. L. Tsai, J. R. Yang and I Ferguson, “Suppression of phase separation in InGaN layers grown on lattice-matched ZnO substrates”, Journal of Crystal Growth, 311 (2009) 4628-4631.

93.      Das, S. Maikap, W. C. Li, L. B. Chang, and J. R. Yang, “Physical and Memory Characteristics of Atomic-Layer-Deposited High-kappa Hafnium-Aluminum-Oxide Nanocrystal Capacitors with Iridium-Oxide Metal Gate”, Jpn. J. Appl. Phys. 48 (2009) 05DF02.

94.      M. K. Wu, Y. T. Shih, M. J. Chen, J. R. Yang, M. Shiojiri, “ZnO quantum dots embedded in a SiO2 nanoparticle layer grown by atomic layer deposition”, Physica  Status Solidi-Rapid Research Letters, 3 (2009) 88-90.    

95.      Y. T. Shih, M. K. Wu, W. C. Li, H. Kuan, J. R. Yang, M. Shiojiri and M. J. Chen, “Amplified spontaneous emission from ZnO in n-ZnO/ZnO nanodots–SiO₂ composite/p-AlGaN heterojunction light-emitting diodes”, Nanotechnology 20, 165201 (2009).

96.      F.H. Kao, W.C. Li , C. Y. Chen , C. Y. Huang, J. R. Yang and S. H. Wang,” Cross-sectional observation of the intermetallic phase in a galvannealed steel”, Materials Science and Engineering A, 499 (2009)45-48.

97.      C. Y. Chen , H. W. Yen, .F.H. Kao, W. C. Li , C. Y. Huang, J. R. Yang and S. H. Wang, “Precipitation hardening of nanometer-sized carbides in high-strength low-alloy steels”, Materials Science and Engineering  A, 499(2009)162-166.

98.      S. H. Wang, H.H. Lee , C.Y. Chen and J. R. Yang, “The variation of beta phase morphology after creep and negative creep for duplex titanium alloys”, Journal of Materials Science, 44 (2009) 408-413.

99.      S. Y. Huang and J. R. Yang, “A Transmission Electron Microscopy Observation of Dislocations in GaN Grown on (0001) Sapphire by Metal Organic Chemical Vapor Deposition”, Japanese Journal of Applied Physics, 47 (2008) 7998-8002.

100.    S. Maikap, T.Y. Wang, P.J. Tzeng, and J.R. Yang, “Low voltage operation of high-k HfO2/Tio2/Al2O3 singlequantum well for nanoscale flash memory device applications”, Japanese Journal of Applied Physics, 47 (2008) 1818-1821.

101.    S. Maikap, P.J. Tzeng, T.Y. Wang and J.R. Yang, “Memory characteristics of atomic-layer-deposited high-k HfAlO nanocrystal capacitors” Electrochemical and Solid State Letters, 11(2008) K50-K52.

102.    M. K. Wu, Y.T. Shih, W.C. Li, M. J. Chen, J. R. Yang and M. Shiojiri, “Ultraviolet Electroluminescence From n-ZnO-SiO2-ZnO Nanocomposite/p-GaN Heterojunction Light-Emitting Diodes at Forward and Reverse Bias”, IEEE Phtonics Technology Letters, 20(2008)1772-1774.

103.    S. H. Wang, C.Y. Chen, S. W. Lee and J. R. Yang, “Effects of dynamic impact on mechanical properties and microstructure of special stainless steel weldments”,  Materials Chemistry and Physics, 111 (2008) 172-179.

104.    J. R. Yang, H. L. Tsai, T. Y. Wang, H. W. Yen, C. Y. Chen, W. C. Li and H. R. Chen, “Nanostructural analysis of a GaN-based violet laser diodes”, Surface Review and Letters, 15(2008)189-193.

105.    S. Maikap, T. Y. Wang, T.J. Tzeng and J. R. Yang, “Band offsets and charge storage characteristics of atomic layer deposited high-k HfO₂/TiO₂ multilayers”, Applied Physics Letters, 90, 262901 (2007).

106.    Y. Chen, H. W. Yen and J. R. Yang, “Sympathetic nucleation of austenite in a Fe-22Cr-5Ni duplex stainless steel”,  Scripta Materialia 56 (2007) 673-676.

107.    Wu, S.H. Wang, C. Y. Chen, J. R. Yang, P. K. Chiu and J. Fang, “Inverse effect of strain rate on mechanical behavior and phase transformation of superaustenitic stainless steel”, Scripta Materialia,  56 (2007) 717-720.

108.    T.H. Yu and J. R. Yang, “Effect of retained Austenite on GPM A30 high-speed steel”, Journal of Materials Engineering and Performance, 16(2007)500-507.

109.    T.H. Yu, C.Y. Chen and J. R. Yang, “Decomposition of retained Austenite in a high-speed steel GPM A30”, Journal of Materials Engineering and Performance, 16(2007) 102-108.

110.    H. L. Tsai, T. Y. Wang, J. R. Yang, C. C. Chuo , J. T. Hsu, M. Ceh, H. Saijo and M. Shiojiri, “Structural analysis of strained p-type AlGaN/GaN superlattice, Journal of Applied Physics,  101, 023521 (2007).

111.    H. L. Tsai, T. Y. Wang, J. R. Yang, C.C. Chuo, J. T. Hsu, Z. C. Feng and M. Shiojiri, “Observation of V-defects in multiple InGaN/GaN Quantum well layers”, Materials Transactions, 48(2007) 894-898.

112.    S. Maikap, P. J. Tzeng, T. Y. Wang, H. Y. Lee, C. H. Lin, C. C. Wang, L. S. Lee, J. R. Yang and M. J. Tsai, ‚“HfO₂/HfAlO/HfO₂ nanolaminate charge trapping layers for high performance nonvolatile memory device applications“, Japanese Journal of Applied Physics, 45(2007)1803-1807.

113.    S. Maikap, T. Y. Wang, ,P. J. Tzeng, H. Y. Lee, C. H. Lin, C. C. Wang, L. S. Lee, J. R. Yang and M. J. Tsai, “Charge storge characteristics of atomic layer deposited RuO_x nanocrystals” Applied Physics Letters, 90, 253108 (2007).

114.    H. L. Tsai, T. Y. Wang, J. R. Yang, T. C. Wang, J. T. Hsu and M. Shiojiri, “Observation of high density INGaN quantum dots”, Journal of Applied Physics, 102 (2007) 013521.

115.    Y. Chen, H.W.Yen, T.H. Yu and J. R. Yang, “Intragranularly nucleated austenite in a 2205 duplex stainless  steel”, Materials Science Forum, Vols. 539-543 (2007) 4881-4886.

116.    S. Maikap, H. Y. Lee, T. Y. Wang, P. J. Tzeng, C.C. Wang, L. S. Lee, K. C. Liu, J. R. Yang and M. J. Tsai, “Charge trapping characteristics of atomic-layer-deposited HfO₂ films with Al₂O₃ as a blocking oxide for high-density non-volatile memory device applications” Semicoductor Science and Technology, 22(2007) 884-889.

117.    H. Wang, C.C. Wu, C.Y. Chen, J. R. Yang, P. K. Chiu and J. Fang, “Cyclic deformation and phase transformation of 6 Mo superaustenitic stainless steel”, Metals and Materials International, 13(2007) 275-283. 

118.    H. S. Wang, C.Y. Huang and J.R. Yang, “Cross-sectional transmission electron microscopy of ultra-fine wires of AISI 316L stainless steel”, Philosophical Magazine, 86(2006), pp.237-251.

119.    J. H. Chen, Z. C. Feng, H. L. Tsai, J. R. Yang, P. Li., C. Wetzel, T. Detchprohm and J. Nelson, “ Optical and structural properties of INGaN/GaN multiple quantum well structure grown by metalorganic chemical vapor deposition”, Thin Solid Film 498(2006), pp.123-127.

120.    J. H. Chen, Z. C. Feng, J. C. Wang, H. L. Tsai, J. R. Yang, A. Parekh, E. Armour and  P. Faniano, “Study of Carrier Localization in InGaN/GaN Quantum Well Blue-Light-Emitting Diode Structures”, Journal of Crystal Growth, 287(2006), pp.345-358

121.    M. Shiojiri , C. C. Chuo , J. T.  Hsu , J. R. Yang and H.Saijo, “Structure and formation mechanism of V defects in multiple InGaN/GaN quantum well layers”, Journal of Applied Physics, 99(2006), 073505.

122.    S. H. Wang, P. K. Chiu, J. R. Yang and J. Fang, “Gamma phase transformation in pulsed GTAW weld metal of duplex stainless steel”, Materials Science and Engineering A, 420 (2006), pp.26-33.

123.    T. C. Wang , H. C. Kuo , T. C. Lu , C. E. Tsai , M. Y. Tsai , J. T. Hsu ,and J.R. Yang, “Study of InGaN multiple quantum dots by metal organic chemical vapor deposition”, Japanese Journal of Applied Physics, 45(2006), pp.3560-3563.

124.    P. K. Chiu, S. H. Wang , J. R.Yang, K. L. Weng and Fang J, “The effect of strain ratio on morphology of dislocation in low cycle fatigued SAF 2205 DSS”, Materials Chemistry and Physics, 98(2006), pp.103-110.

125.    S. Chatterjee, H.S.Wang, J.R.Yang and H.K.D.H. Bhadeshia, “The Mechanical Stabilisation of Austenite”, Materials Science and Technology, 22 (2006), pp.641-644.

126.    M. Shiojiri, M. Ceh , S. Sturm , C. C. Chuo , J. T. Hsu , J. R. Yang and H. Saijo, “Structural and Compositional Analyses of a Strained AlGaN/GaN Superlattice”, Journal of Applied Physics, 100, (2006), 013110.

127.    S. C. Chin, C. Y. Chi, L. Hong, C. C. Yang and J. R. Yang, “Nano-structure study of ZnO thin films on sapphire grown with different temperature conditions”, Journal of Crystal Growth, 293(2006), pp.344-350.

128.    J.R. Yang, T. H. Yu and C.H. Wang, “Martensitic Transformations in AISI 440C Stainless Steel”, Materials Science and Engineering A438-440 (2006) 276-280.

129.    P. K. Chiu, K. L. Weng, S. h. Wang, J. R. Yang, Y. S. Huang, Jason Fang, “Low-Cycle Fatigue Induced Martensitic Transformation in SAF 2205 Duplex Stainless Steel,” Materials Science and Engineering A, Vol.398, (2005), pp.348-359.

130.    M. Shiojiri, M. Ceh, S. Sturm, C.C. Chuo, J. T. Hsu, J. R. Yang and H. Sajio. ”Determination of thickness and lattice distortion for the individual layer of strained AlGaN/GaN superlattice by high-angle annular dark-field scanning transmission electron microscopy”, Applied Physics Letters, 87(2005) pp.031914-031916.

131.    M. K. Chen, Y.C. Cheng, J. Y. Chen, C. M. Wu, C. C. Yang, K. J. Ma, J. R. Yang and A. Rosenauer, “Effects of Silicon Doping on the Nanostructures of InGaN/GaN Quantum Wells”, Journal of Crystal Growth, 279/1-2 (2005) pp.55-64.

132.    H.S.Wang, J.R.Yang and H.K.D.H.Bhadeshia, “Characterisation of Severely Deformed Austenitic Stainless Steel Wire”, Materials Science and Technology, 21(2005), pp.1323-1328

133.    H. Saijo, J. T. Hsu, R. C. Tu, M. Yamada, M. Nakagawa, J. R. Yang, M. Shiojiri, " Mapping of multiple-quantum-well layers and structure of V defects in InGaN / GaN diodes" , Applied Physics Letters, 84(2004)2271-2273.

134.    Y. C. Cheng, E. C. Lin, C. M. Wu, C.C. Yang and J. R. Yang, “Nanostructures and carrier localization behaviors of green-luminescence InGaN/GaN quantum-well structures of various silicon-doping conditions”, Applied physics Letters, 84(2004)2506-2508.

135.    Y. C. Chen, C. M. Wu, M. K. Chen, C. C. Yang, Z. C. Feng, and J.R. Yang, “Improvements of InGaN/GaN quantum-well interfaces and radiative efficiency with InN interfacial layers”, Applied Physics Letters, 84(2004)5422-5424.

136.    H. Saijo, M. Yamada, M. Nakagawa, J. T. Hsu, R. C. Tu, J. R. Yang, M. Shiojiri, " High-resolution scanning electron microscopy observation of GaN / AlGaN Strained-Layer Superstructures in GaN-based violet Laser Diodes" , Japanese Journal of Applied Physics, 43(2004)968-969.

137.    K. L. Weng, H. R. Chen and J. R. Yang, 2004, “The Low- Temperature Aging Embrittlement in a 2205 Duplex Stainless Steel,” Materials Science and Engineering A, Vol.398 (2004), pp.349-359.

138.    M. C. Tsai and J. R. Yang, "Microstructural degeneration of simulated heat-affected zone in 2.25Cr-1Mo steel during high temperature exposure" , 2003, Materials Science and Engineering A, A340(2003)15-32.

139.    K. Watanabe, J. R. Yang, N. Nakanishi, K. Inoke and M. Shiojiri, " Formation and Structure of inverted hexagonal pyramid defects in multiple quantum wells InGaN / GaN" , 2003, Applied Physics Letters, 82(2003)718-720.

140.    K. Watanabe, J. R. Yang, N. Nakanishi, K. Inoke and M. Shiojiri, " Atomic-scale strain field and In atom distribution in multiple quantum wells InGaN / GaN" , 2003, Applied Physics Letters, 82(2003)715-717.

141.    L.W. Tsay , T.S. Chern , C.Y. Gau and J. R. Yang, 1999, " Microstructures and fatigue crack growth of EH36 TMCP steel weldments", International Journal of Fatigue, 21(2003), pp.857-864.

142.    K. Watanabe, J. R. Yang, N. Nakanishi, K. Inoke and M. Shiojiri, 2003, " Formation and structure of inverted hexagonal pyramid defects in multiple quantum wells InGaN/GaN," Applied Physics Letters, 82(2003)718-720.

143.    M. C. Tsai, C. S. Chiou and J. R. Yang, 2003, “Microstructural Evolution of Simulated Heat-affected Zone in Modified 2.25Cr-1Mo Steel during High Temperature Exposure,” Journal of Materials Science, 38(2003), pp.2373-2391.

144.    K. Watanabe, J. R. Yang, N. Nakanishi, K. Inoke and M. Shiojiri, 2002," Direct Determination of Atomic Structure in MQW-InGaN / GaN," Applied Physics Letters, 80(2002) 761-762.

145.    C. N. Hsiao, C. S. Chiou and J. R. Yang, "Aging Reactions in a 17-4 PH Stainless Steel", 2002, Materials Chemistry and Physics, 74(2002) 134-142.

146.    M. C. Tsai, C. S. Chiou, J. S. Du and J. R. Yang, "Phase Transformation in AISI 410 Stainless Steel" ,2002, Materials Science and Engineering A, A232(2002)1-10.

147.    T. H. Chen and J. R. Yang, "Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel", 2002, Materials Science and Engineering A,A338(2002) 166-181.

148.    T. H. Chen, K. L. Weng and J. R. Yang, " The effect of high-temperature exposure on the microstructural stability and toughness property in a 2205 duplex stainless steel" ,2002, Materials Science and Engineering A, A338(2002)259 –270.

149.    C. S. Chiou, J. R. Yang and C.Y. Huang, " The Effect of Prior Compressive Deformation of Austenite on Toughness Property in an Ultra-Low Carbon Bainitic Steel",2001, Materials Chemistry and Physics, 69(2001)113-124.

150.    T. H. Chen and J. R. Yang, "Effects of Solution Treatment and Continuous Cooling on σ-phase Precipitation in a 2205 Duplex Stainless Steel" 2001, Materials Science and Engineering A, A311(2001)28-41.

151.    R. H. Larn and J. R. Yang, " The Effect of Compressive Deformation of Austenite on the Bainitic Ferrite Transformation in Fe-Mn-Si-C steels" , 2000, Materials Science and Engineering, A278(2000)278-291.

152.    C. N. Hsiao and J. R. Yang, " Age Hardening in Martensitic / Bainitic Matrices in a Copper-Bearing Steels" , 2000, Materials Transactions, JIM, Vol.41 (2000)1312-1321.

153.    J. R. Yang , C.Y. Huang and C. S. Chiou, 1999, " Microstructures of Heat-Affected Zone in Niobium Containing Steels, " Materials Transactions , JIM , Vol.40 (1999), pp.199-208.

154.    R. H. Larn and J. R. Yang, 1999, " The Effect of Compressive Deformation of Austenite on Widmanstatten Ferrite Transformation in Fe-Mn-Si-C Steel," Materials Science and Engineering , A264 ( 1999), pp.139-150 .

155.    J. R. Yang and L. C. Chang, 1997, “The Effect of Stress on the Widmanstätten Ferrite Transforamtion,” Materials Science and Engineering, A223(1997), pp.158-167.

156.    J. R. Yang and S. H. Liou, 1997, “Microstructural Evolution in the Simulated HAZ in ASTM A533 Type B Steel Plates,” Science and Technology of Welding and Joinging, Vol.2(1997), pp.119-127.

157.    J. R. Yang, C.Y. Huang, W. H. Shieh and C. S. Chiou, 1996, “Mechanical Stabilization of Austenite against Bainitic Reaction in a Fe-Mn-Si-C Bainitic Steel,” Materials Transaction, JIM, 4(1996), pp. 579-585

158.    J. R. Yang, C. Y. Huang and C. F. Huang, “Acicular Ferrite Transformation in Deformed Austentite of an Alloy Steel Weld Metal,” Journal of Materials Science, 30(1995), pp.5036-5041.

159.    J. R. Yang, C. Y. Huang amd C. S. Chiou, 1995, “The Influence of Plastic Deformation and Coolimg Rates on the Microstructural Constituents of an Ultra-Low Carbon Bainitic Steels,” ISIJ Interational, Vol.35(1995), pp.1013-1019.

160.    J. R. Yang, C.Y. Huang, W. H. Shieh and C. S. Chiou, 1995, “Mechanical Stabilization for Bainitic Reaction in a Fe-Mn-Si-C Bainitic Steel,” Journal de Physique IV, 5(1995) Colloque C8, pp. 497-502.

161.    J. R. Yang, C. Y. Huang, C. N. Yang and J. L. Horng, 1993, “Microstructural Examination of 2.25Cr- 1Mo Steel Steam Pipes after extended Service,” Materials Characterization, Vol.30, pp.75-88.

162.    J.R. Yang, C.Y. Haung and C.F Haung, 1993, “Inflluence of Acicular Ferrite and Bainite Microstructures on Toughness for an Ultra-Low-Carbon Alloy Steel Weld Metal,” Journal of Materials Science Letters, V.12, pp.1290-1293.

163.    J. R. Yang and C. Y. Huang, 1993, “Formation of Austenite from a Mixture of Bainitic Ferrite and Austenite,” Materials Chemistry and Physics, Vol.35, pp.168-175.

164.    C. Y. Huang, J. R. Yang and S. C. Wang, 1993, “The Effect of Compressive Deformation on the Transformation Behavior of an Ultra-Low-Carbon Bainitic Steel,” Materials Transsactions, JIM, Vol.34, pp.658-668.

165.    S. C. Wang and J. R. Yang, 1992, “The effects of Chemical Composition, Rolling, and Cooling Conditions on the Amount of M/A Constituent Formation in Low Carbon Bainite Steels,” Materials Science and Engineering, Vol. A154, pp.43-49.

166.    J.R. Yang, C.C. Huang and C.Y. Huang,1992,The Coexistence of Acicular Ferrite and Bainite in An Alloy-Steel Weld Metal, Journal of Materials Science Letters, Vol.11, pp.1145-1146.

167.    S. C. Wang, R. I. Hsieh, H. Y. Liou and J. R. Yang, 1992, “The Effects of Rolling Processes on the Microstructure and Mechanical Properties of Ultra Low Carbon Bainitic Steels,” Materials Science and Engineering, Vol.A157, pp.29-36.

168.    J. R. Yang, C. Y. Huang and S. C. Wang, 1992, “The Development of Ultra-Low-Carbon Bainitic Steels,” Materials & Design, Vol.13, pp.335-338.

169.    J. R Yang and H.K.D.H. Bhadeshia, 1991, “Continuous Heating Transformation of Bainite to Austenite”, Materials Science and Enginerring ,Vol. A131, pp.99-113.

170.    J. R Yang and H.K.D.H. Bhadeshia, 1991, “Acicular Ferrite Transformation in Alloy-Steel Weld Metals”, Journal of Materials Science, Vol.26, pp.839-845.

171.    J. R. Yang and L.J Chen, 1991, Dual Ferrite-Martensite Treatments of a High Strength Low Alloy ASTM A588 Steel, Journal of Materials Science, Vol.26, pp.889-899.

172.    S. L. I. Chan, H. L. Lee, and J. R. Yang, 1991, “Effect of Ratained Austenite on the Hydrogen Occlusivity and Effective Diffusivity of Martensitic Structure,” Metallurgy Transaction A, Vol.22 A, pp.2579-2586.

173.    J.R Yang and H.K.D.H. Bhadeshia, 1990, “The Dislocation Density of Acicular Ferrite”, American Welding Journal, Vol. 69, pp.305S-307S.

174.    J. R Yang and H.K.D.H. Bhadeshia, 1989, “Orientation Relationships between Adjacent Plates of Acicular Ferrite in Steel Weld Deposits”, Materials Science and Technology, Vol.5, pp.93-97.

175.    J. R Yang and H.K.D.H. Bhadeshia, 1989, “Reaustenitisation Experiment on Some High-Strength Steel Weld Deposits”, Materials Science and Engineering, Vol. A118, pp.155-170.